Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY 423
(Continued)
Center High-Mounted Stop Lamp (CHMSL)
The stop lamp is mounted on a bracket that extends upward
from th
e tailgate behind the spare tire. If service is needed,
obtain the LED Assembly from an authorized dealer.
1. Remove the spare tire.
2. Remo
ve the screws holding the tire carrier cover.
3. Remo
ve two screws from lamp assembly and disconnect
electr
ical connector.
License Plate Lamps
See an authorized dealer to replace these LED assemblies.
FUSES
General Information
The fuses protect electrical systems against excessive
current.
When a device does not work, you must check the fuse
e
l
ement
inside the blade fuse for a break/melt.
WARNING!
• When replacing a blown fuse, always use an appro-
priate
replacement fuse with the same amp rating as the
original
fuse. Never replace a fuse with another fuse of
higher amp rating. Never replace a blown fuse with
metal wires or any other material. Failure to use proper
fuses may result in serious personal injury, fire and/or
property damage.
• Before replacing a fuse, make sure that the ignition is
off and that all the other services are switched off and/
or disengaged.
• If the replaced fuse blows again, contact an authorized
dealer.
• If a general protection fuse for safety systems (air bag
system,
braking system), power unit systems (engine
system, gearbox system) or steering system blows,
contact an authorized dealer.
WARNING! (Continued)
6
Loading ...
Loading ...
Loading ...