Loading ...
Loading ...
Loading ...
294 SAFETY
Four-Door Models:
There are tether strap anchorages behind each rear seating
position
located on the back of the seat.
Tether Strap Anchorages (Four-Door Models)
LATCH-compatible child restraint systems will be equipped
with a ri
gid bar or a flexible strap on each side. Each will
have a hook or connector to attach to the lower anchorage
and a way to tighten the connection to the anchorage.
Forward-facing child restraints and some rear-facing child
restraints will also be equipped with a tether strap. The
tether strap will have a hook at the end to attach to the top
tether anchorage and a way to tighten the strap after it is
attached to the anchorage.
Center Seat LATCH
Two-Door Models:
Four-Door Models:
Do not install child restraints with rigid lower attachments in
the cent
er seating position. Only install this type of child
restraint in the outboard seating positions. Child restraints
with flexible, webbing mounted lower attachments can be
installed in any rear seating position.
WARNING!
This vehicle does not have a center seating position. Do
not use t
he center lower LATCH anchorages to install a
child seat in the center of the back seat.
WARNING!
Never use the same lower anchorage to attach more than one
child re
straint. If you are installing LATCH-compatible
child restraints next to each other, you must use the seat belt
for the center position. You can then use either the LATCH
anchors or the vehicle’s seat belt for installing child seats in
the outboard positions.
Please refer to “Installing The LATCH-Compatible Child
Restrain
t System” for typical installation instructions.
Loading ...
Loading ...
Loading ...