Loading ...
Loading ...
Loading ...
Rear turn signal
›
Remove the cover with
the bracket from the
tool kit.
›
Unscrew the screws
A
and remove the
light.
›
Press the lock mecha-
nisms on the connec-
tor and remove the
connector.
›
Turn and remove the
socket with the bulb.
›
Change the bulb in the
socket.
›
Insert the socket with
the new bulb into the
light so that the guide
lugs on the socket are
aligned with the corre-
sponding openings in
the light.
›
Turn the socket clock-
wise
to secure.
›
Insert the connector into the light until it clicks into
place.
›
Insert the pins A of the light into the openings B
in the body.
NOTICE
Risk of damage to the electrical system!
▶
Make sure that the cables between the light and
the body are not pinched when the light is inserted.
›
Screw the light into place.
›
Fit the cover of the light, ensuring it clicks into
place.
Reversing lights
›
Open the boot lid.
›
Release and remove
the cover cap in the
boot lid.
›
Turn and remove the
socket with the bulb.
›
Change the bulb in the
socket.
›
Insert the socket with
the new bulb into the
light so that the guide
lugs on the socket are
aligned with the corre-
sponding openings in
the light.
›
Turn the socket clock-
wise
to secure.
›
Insert the cover cap until it clicks into place.
43
Lighting, windscreen wipers and washers › Replace light bulbs
Loading ...
Loading ...
Loading ...