Loading ...
Loading ...
Loading ...
Keys, locks and alarm system
Key
Key Overview
Locking the vehicle
Operate the boot lid
Unlocking the vehi-
cle
A
Battery status warn-
ing lamp
B
Locking button for
folding the key bit
in/out
NOTICE
▶
Protect the key from moisture and strong vibra-
tions.
▶
Keep the grooves in the key clean.
The eective range of the key is about 30m. The
eective range of the key can be reduced, e.g. due to
signal interference from other transmitters.
Troubleshooting
The battery in the key is almost empty
▶
After pressing a button on the key, the warning
light does not flash.
Or:
▶
A message stating it is necessary to change the
battery will be displayed.
›
Replace the battery » page 19.
The vehicle cannot be unlocked or locked with the
remote control
There may be the following reasons.
▶
The battery in the key is empty.
›
Replace the battery » page 19.
▶
The key is not synchronized.
Synchronize the key as follows.
›
Press one of the buttons on the key.
›
Unlock the door within 1 minute with the key via
the locking cylinder » page 20.
If necessary, the key must be synchronized if one
of the buttons on the key has been repeatedly press-
ed outside of the eective range of the remote con-
trol.
Changing the key battery
The new battery must comply with the specification
of the original battery.
›
Fold out the key bit.
›
Release the battery
cover with your
thumbnail or by insert-
ing a flat-head screw-
driver at the marked
points.
›
Open the battery cov-
er.
›
Remove the battery.
›
Press any button on
the remote key to re-
set the key.
›
Insert the new battery.
›
Fit the battery cover
and press until it clicks
into place.
Central locking
Functionality
Central locking system
The system unlocks and locks all doors, the fuel filler
flap and the boot lid at the same time.
Unlock indicator: double flashing of the indicator
lights.
Lock indicator: single flashing of the indicator lights.
The warning light in the driver's door will flash for
about 2 seconds in quick succession after the vehicle
is locked, then it will start flashing regularly at longer
intervals.
If none of the doors or the boot lid is opened
within 45 seconds of unlocking, the vehicle automat-
ically locks again.
SAFE function
Depending on the equipment, the SAFE function can
be integrated into the central locking system.
The SAFE function prevents the doors from opening
from the inside once the vehicle is locked.
The SAFE function switches on when the vehicle is
locked.
In the display of the instrument cluster after the igni-
tion is switched o, a message regarding the SAFE
function is displayed.
19
Keys, locks and alarm system › Key
Loading ...
Loading ...
Loading ...