Loading ...
Loading ...
Loading ...
Operating conditions
✓ Visibility has worsened.
✓
The light switch is in the position.
Settings
This function is set in the following menu in the Info-
tainment system.
Or:
Light Assist high-beam assist system
Functionality
The high beam assist system automatically switches
the high beam on and o.
WARNING
Risk of an accident!
▶
If necessary, manually switch the high beam on or
o.
Operating conditions
✓ The system is activated.
✓
The light switch is in the
position.
✓ The driving speed is higher than 30 km/h (for
some countries, higher than 60 km/h).
✓ The low beam is switched on.
Operation
Switching on
›
Push the lever in the
direction of the arrow.
in the instrument
cluster lights up.
Switching o
›
Manually switch the high beam on or o.
Settings
Activation/deactivation
The function is activated or deactivated in the fol-
lowing menu in the Infotainment system.
Or:
Replace light bulbs
What you should be mindful of
DIY replacement of the following bulbs is possible.
Have the remaining light sources replaced by a spe-
cialist garage.
The new bulb must conform to the specification of
the original light bulb. The name of the bulb is
marked on the bulb socket.
After changing a bulb in the high beam or in the front
fog light, have the headlights adjusted by a specialist
garage.
CAUTION
Halogen lamps are pressurised and can burst during
replacement!
▶
Wear gloves and safety goggles.
NOTICE
Contamination of the halogen lamp reduces the life
of the lamp!
▶
Do not touch the glass of the light bulb with your
bare fingers.
NOTICE
Danger of headlight damage due to the ingress of
water and dirt!
▶
Always fit the protective cap on the headlight cor-
rectly after changing a bulb.
Conditions for changing a bulb
✓ Ignition switched o.
✓ Light switched o.
Fog lights
›
Release the cover with
the bracket from the
tool kit and remove it.
41
Lighting, windscreen wipers and washers › Light Assist high-beam assist system
Loading ...
Loading ...
Loading ...