Loading ...
Loading ...
Loading ...
Wash with a pressure washer
NOTICE
▶
Follow the operating instructions for the high-
pressure cleaner. This particularly applies to infor-
mation with respect to the pressure and spray dis-
tance from the vehicle surface.
▶
Do not direct the water jet directly at the following
vehicle parts.
▶
Foils.
▶
Locks.
▶
Columns on the vehicle.
▶
Trailer connection.
▶
Swivelling ball bar.
▶
Sensors.
▶
Camera lenses.
▶
Plastic, chromed and anodised parts.
Remove snow and ice
NOTICE
▶
Remove snow and ice with a plastic scraper or a
suitable deicing agent.
▶
Clean the cameras with a hand brush.
▶
Only move the scraper in one direction.
▶
Do not use scratchers or other sharp objects for
foils.
▶
Do not remove snow and ice with hot or warm wa-
ter.
▶
Do not remove snow and ice from surfaces with
coarse dirt.
Instructions for cleaning
Handwash
›
Wash the vehicle from top to bottom with a soft
sponge or wash glove and plenty of water, if nec-
essary with additional suitable cleaning agents.
›
For foils and headlights, use a mild soap solution
that contains two tablespoons of white neutral
soap to one litre of lukewarm water.
›
Use a glass cleaner for the windscreen wiper
blades.
›
Wash the cameras with clean water and dry with a
suitable clean wipe.
NOTICE
▶
Wash out the sponge or wash mitt regularly.
▶
Use a dierent sponge for wheels, sills and the
lower part of the vehicle than that used for the
other vehicle parts.
▶
Do not wash the vehicle in the blazing sun.
▶
Do not dry the headlights or use sharp objects.
▶
Do not put pressure on the bodywork when wash-
ing.
▶
The temperature of the washing water may be a
max. 60 °C.
After hand washing
›
Rinse the vehicle and wipe it with a suitable clean
cloth.
Vehicle paint
›
Preserve the varnish at least twice a year with hard
wax.
›
Use a polish for matt lacquers.
Foils
Films will age and become brittle – this is entirely
normal: this is not an error.
The following factors have a negative eect on the
life or colour fastness of the films.
▶
Sun rays.
▶
Moisture.
▶
Air pollution.
▶
Stones, e.g. the rebound of the cargo during trans-
port on the roof rack.
Protection of hollow spaces
Corrosion-prone cavities of the vehicle are perma-
nently protected by preservative wax at the factory.
›
Remove spilled wax with a plastic scraper, clean
stains with mineral spirits.
Underbody protection
The underside is permanently protected by the fac-
tory against chemical and mechanical influences.
›
Have the protective coating checked by a special-
ist garage before starting and at the end of the
cold season.
Wheels
›
After washing, preserve the wheels with suitable
means.
NOTICE
Severe dirt on the wheels can result in the wheels
unbalancing.
Car jack
›
If necessary, treat moving parts with suitable
grease.
Trailer towing coupling
›
Coat the ball head of the towing device with a suit-
able grease whenever necessary.
164
Maintaining and cleaning › Exterior
Loading ...
Loading ...
Loading ...