Loading ...
Loading ...
Loading ...
D
Tyre diameter in inches
This information only serves as information for
the prescribed tyre pressure. This is not a listing
of approved tyre sizes for your vehicle. These
are listed in the technical vehicle documentation
and in the declaration of conformity (in the so-
called COCDocument).
E
Tyre pressure reading for the front axle tyres
F
Tyre pressure reading for the rear axle tyres
G
Prescribed tyre pressure value for the emergen-
cy wheel
Tyre pressure monitoring system
Functionality
The tyre pressure monitoring indicator indicates a
change in tyre pressure.
Warning when pressure changes
Illuminated - Tyre pressure change
›
Stop the vehicle.
›
Check the tyres and tyre pressures.
Show tyres with modified pressure
›
In Infotainment, select the following menu.
Vehicle status
Or:
Vehicle status
Function restriction
The system is unable to provide a warning in the
event of a very rapid tyre pressure loss, e.g. sudden
puncture.
The system function may be restricted in the follow-
ing cases.
▶
Uneven loading of the wheels, e.g. with a trailer at-
tached.
▶
Sporty driving style.
▶
Driving on dirt roads.
▶
Snow chains fitted.
Saving tyre pressure values
Store the tyre pressure values in the infotainment
›
Inflate the tyres to the prescribed inflation pres-
sure.
›
Turn on the ignition.
›
In Infotainment, select the following menu.
Vehicle status
Or:
Vehicle status
›
Tap on the functional surface .
Using the functional surfaces select the tyre
control display menu.
›
Then follow the instructions on the screen.
Save the tyre pressures in the following cases.
▶
Change of tyre pressure.
▶
Change of one or more wheels.
▶
Change of position of a wheel on the vehicle.
▶
Always after covering a distance of 10,000 km or
once a year.
Troubleshooting
Tyre pressure monitoring system faulty
flashes for about 1 minute and stays on
›
Stop the vehicle, switch o the ignition and
start the engine.
If the
symbol flashes again after starting the en-
gine, there is a system fault.
›
Continue driving, exercising appropriate caution,
and seek the help of a specialist garage.
Wheel bolt cover caps
Remove cover caps and install
Disconnecting
›
Push the pull-o clamp onto the cover cap up to
the stop.
›
Remove the cover cap.
Installing
›
Push the cover cap onto the wheel bolt to the stop.
Full wheel frame
Removing and installing the trim
Applies to factory built or original accessory trims
from ŠKODA.
150
Wheels › Tyre pressure monitoring system
Loading ...
Loading ...
Loading ...