Loading ...
Loading ...
Loading ...
69
Gate or Door - Used synonymously throughout the manual, these terms refer to controllable entry/exit areas
of the complex, normally a gate or door.
Holiday Schedules - Holiday schedules will modify fixed schedules for selected holiday dates.
ID Number - One part of the number sequence on a remote control.
Manager - This person manages a complex and/or programs the system.
NPB System - No Phone Bill. Uses main phone line like an intercom system between the unit and the resident
phone. No monthly or per call telephone charges.
PBX - A Private Branch Exchange telephone system (Automated) needs to dial a specific number (0-9) then
pause briefly, allowing the PBX system to connect to an outside phone line.
PIN Code - Personal Identification Number predefined for a HID card or remote control.
Programming Number - This is a number that the unit uses to program a function. Each number performs a
specific task.
Radio Frequency (RF) - Each RF module is an RF receiver that is compatible with LiftMaster Passport™
remote controls.
Relay - A device that responds to an electric current by activating other devices, allowing the system, for
example, to lock or unlock a door/gate, shunt (i.e., re-route) alarm contacts, or signal an alarm.
Resident - Person occupying and/or who has entry access to the building or complex that is controlled by a
unit. The term "resident" as used in the context of the manual refers to such persons as homeowners or
tenants of an apartment complex, etc.
Schedules - You can restrict the use of access codes/remote controls by setting limits on the days and times
they may be used. Schedules may also be assigned to doors to restrict residents from gaining access to the
building.
Sequence Code - One part of the number sequence of a remote control.
Telco Mode - Uses the main telephone line for the unit’s communications to a house or complex.
Tenant - Resident or occupant who is using the unit.
Transaction - System activity logged and recorded into the unit’s memory. Such activity includes visitor to
resident directory calls and remote control, card or code activity.
Unit - The unit houses the core components. All system programming will be routed to the unit.
Unit ID Code - Identification number for each unit in a multiple unit setup sharing the same phone line.
Versa XS 4.0 - The software used to program the unit.
Visitor - A visitor can communicate with residents via the unit. A resident can grant or deny a visitor access
with their touch tone phone.
Wiegand Module - Each Wiegand module provides Wiegand inputs for two card readers or other compatible
devices.
G
N
P
R
T
U
H
I
M
S
V
W
GLOSSARY
Loading ...
Loading ...
Loading ...