Loading ...
Loading ...
Loading ...
57
Set Visitor Talk Time: 5
1
Press Then
2
Enter Number of Seconds (15-250). Then (#)
This feature sets the amount of time a visitor and resident may talk before the unit breaks communication. The
unit will beep 10 seconds prior to terminating a call. The resident may press "1" to reset the timer and extend
their talk time.
Factory Setting: 60 seconds
1
Press Then
2
Enter Option:
0 - Alternate between Welcome and Instruction
Messages.
1 - Show welcome message ONLY.
2 - Show instruction message ONLY.
To enter programming mode from the unit
Press *** and the 6-Digit Password (2 short beeps will be heard)
Exiting programming mode allows changes to take effect
If you make an error during an entry, press the asterisk key (*) to begin again.
For EL2000SS ONLY:
* Use Versa XS 4.0 to modify any
Welcome or Instruction Messages.
Enable or Disable "Announce All Doors/Access Granted": 26
1
Press Then
2
Enable (1) or Disable (0). Then (#)
NOTE: Step 23, Enable or Disable "Access Granted" Beeps, controls announcement for door 1 ONLY.
Make sure Step 23 is enabled first, before enabling this step.
Announce access granted for all doors. If doors are in close aproximity know which door to gain access
through. Factory Setting: Disabled.
Set Display Greeting: 160
Return to Menu Programming: 25
1
Press Then
EXAMPLE:
Sets the maximum time a visitor can talk
with a resident to "50" seconds.
Loading ...
Loading ...
Loading ...