Loading ...
Loading ...
Loading ...
31
ENABLE OR DISABLE DO NOT DISTURB SCHEDULE: 10
Do Not Disturb (DnD) Schedules prevent visitors from calling residents during specified time frames. To assign a
DnD Schedule to a Directory Code, use the programming step for adding/editing a full function Directory Code
(see page 30). When enabling/disabling DnD Schedule for a Directory Code, the system will remember the
schedule assigned to the code. Factory Setting: Disabled
1
Press
Then
2
Enter Directory Code (1-4 digits). Then (#).
3
Enable (1) or Disable (0). Call Forwarding. Then (#).
4
Enter Call Forward Schedule (0-63). Then (#)
0 = Never Use Call Forward Number
1 = Use Call Forward Number
DELETE ALL DIRECTORY CODES: 201
1
Press
Then
2
Enter
Then
This will delete ALL Directory Codes from unit.
IMPORTANT: Once you delete the Directory Codes, you cannot retrieve them unless they are saved in
Versa XS 4.0.
Call Forwarding redirects visitor calls to another telephone number instead of the regular phone number.
During a Call Forwarding call, the visitor will hear normal telephone line sounds but will not hear the number
being dialed. You can Enable or Disable the Call Forwarding Feature for a specific Directory Code (Dial-Out).
Factory Setting: Disabled
1 2
3 4 5 5A
5
Only Enter New Call Forward Phone Number (up
to 20 digits). Then (#) (Skip this step to keep
existing Call Forward Phone Number.)
5A
Enter Call Forward Phone Extension (up to 5
digits). Then (#) (If using an extension the
unit MUST have a phone number.)
1 2 3
Press Then
Enter the Directory Code to be enabled or disabled. Then (#)
Enable (1) or Disable (0). Then (#)
2
3
1
Disables the Do Not Disturb schedule for Directory Code "34".
EXAMPLE:
Enables Call Forwarding number 555-3662 for Directory Code "14" with a use schedule of "2".
EXAMPLE:
Call Forwarding Enable or Disable = 0
Call Forwarding Schedule = 0
Factory
Settings
ENABLE OR DISABLE CALL FORWARDING (DIRECTORY CALLS): 46
Loading ...
Loading ...
Loading ...