Loading ...
Loading ...
Loading ...
64
Direct Commands from Your Phone: 120 121 122
Speaking Through the Unit (Intercom Mode):
1
Press from the residence phone.
The unit is now prepared to accept a direct command.
2
Enter the Unit ID code (if applicable).
3
Press
ABC
Then
Direct command allows you to control the unit from the residence phone.
Cycles relay. Typically used to momentarily
open a door/gate for a visitor without having
the visitor initiate a call.
Activate or deactivate the door’s relay group
until a specified time of day. If the door is
currently latched open or in the unlock
position of an automatic time zone then step
122 will latch the door closed and vice versa.
Used to initiate communications from the
resident phone through the unit at any time.
Open & Close Door:
1
Press from the residence phone.
The unit is now prepared to accept a direct command.
2
Enter the Unit ID code (if applicable).
3
Press
ABC
Then
4
Select the Door (1-4) that you want to control. Press
NOTE: If no door is selected then Door 1 is used.
Toggle Door Open/Close Until:
1
Press from the residence phone.
The unit is now prepared to accept a direct command.
2
Enter the Unit ID code (if applicable).
3
Press
ABCABC
Then
4
Select the Door (1-4) that you want to control. Press
NOTE: If no door is selected then Door 1 is used.
5
ONLY for step #2 sections Toggle Door Open/Close Until and Get Door Status
Enter the Latch Time (hhmm=Hour and Minute). Then
Loading ...
Loading ...
Loading ...