Loading ...
Loading ...
Loading ...
56
Change the Visitor Call Response Keys: 116
1
Press Then
2
Enter Door 1 Relay (0-9 or *). Then (#)
3
Enter Door 2 Relay (0-9 or *). Then (#)
4
Enter Door 3 Relay (0-9 or *). Then (#)
When a visitor contacts a resident with a unit, the resident can allow entry by pressing one of
the keys on their phone. Options are:
VISITOR COMMUNICATION SETTINGS
NOTE: The asterisk key (*) WILL NOT
cancel a command in this programming
sequence because the asterisk key (*)
may be assigned to a specific phone key
response.
Enable or Disable "Access Granted" Beeps: 23
1
Press Then
2
Enable (1) or Disable (0). Then (#)
Factory Setting: Enabled
1 2
NOTE: This will disable the 10 short beeps used by "Direct
Command Responses". See page 18.
Enable or Disable Voice Mail: 22
22
1
Press Then
2
Enable (1) or Disable (0). Then (#)
1 2
If a voice mail system is connected to a resident’s telephone line, the unit allows the visitor to
dial an extension during a resident call. If enabled, the visitor places a resident call, the voice
mail system answers the call, the visitor can then dial an extension on the unit keypad. The unit
only allows up to 5 digits to dial extension. Factory Setting: Disabled
s y e
K
e n o
h
P
Activate all Entry Devices on Door 1 Relay(s)
Activate all Entry Devices on Door 2 Relay(s)
Activate all Entry Devices on Door 3 Relay(s)
Activate all Entry Devices on Door 4 Relay(s)
Toggle between the visitor and another phone call.
Extend the talking time with a visitor
Hang up and deny access to the visitor
To change these Response Keys:
5
Enter Door 4 Relay (0-9 or *). Then (#)
6
Call Wait Toggle (0-9 or *). Then (#)
7
Extend Talk Time (0-9 or *). Then (#)
1
2 3 4 5 6 7
Changes the phone key that operates Door 1 Relay(s) to "8". If a resident presses "8"
on their phone while speaking to a visitor, the Door 1 Relay(s) will activate.
EXAMPLE:
Disables the access granted beeps.
EXAMPLE:
Enables the voice mail.
EXAMPLE:
Loading ...
Loading ...
Loading ...