Loading ...
Loading ...
Loading ...
52
This section describes the features for configuring telephone and unit communication settings. The units use the
building’s existing telephone line to provide communication between visitors and residents, while also allowing
someone to remotely program the unit via modem.
TELEPHONE-UNIT SETTINGS
Set Alternative Prefixes: 115
1
Press Then
2
Enter Normal (00), Mixed (01), Asterisk (02), Pound (03), Number (1n). Then (#).
Sets the Alternative Prefixes to for Direct Commands and for Programming.
This must be used if the phone company will not allow you to use the "#" key.
When you press or on the resident phone, the unit will allow you to send a Direct Command
or Program the System , and disconnects from the telephone line to wait for commands. Some
telephone companies offer special features that require you to press a preceding or . If you subscribe to
such services and the unit interferes with them, you can program the unit to accept different prefixes.
Factory Setting: 00 (Normal)
To enter programming mode from the unit
Press *** and the 6-Digit Password (2 short beeps will be heard)
Exiting programming mode allows changes to take effect
IMPORTANT:
• The Pound Key (#) must be used as Data Field Separator and to Save Date at the end of the sequence.
• Time must be entered using a 24-hour format (8am=0800; 3pm=1500 etc.).
• 2 Short Beeps: Programming input is valid. 1 Long Beep: Input is not valid.
• If you make an error during an entry, press the asterisk key (*) to begin again.
00 (Normal):
for Direct Commands,
for Programming
01 (Mixed):
2 Key Combo for Direct Commands (e.g.,
or
)
3 Key Combo for Programming (e.g.,
or
)
02 (Asterisk):
for Direct Commands,
for Programming
03 (Pound):
for Direct Commands,
for Programming
1n (Number):
(n
) for Direct Commands, (nn ) for Programming
("n" is a number from 1 to 9)
Alternative prefix options include the following:
COMMUNICATIONS TO AND FROM UNIT
Loading ...
Loading ...
Loading ...