Loading ...
Loading ...
Loading ...
66
Restore Factory Settings: 28
Proceed With CAUTION!
When this is completed, directory codes, entry codes, cards, remote controls, holidays and schedules WILL NOT
be reset. All other programming will be reset to the factory settings. See the Quick Reference Guide to review the
factory settings (pages 4-8).
IMPORTANT: Once you restore the Factory Settings, you cannot retrieve the deleted settings unless they are
saved in Versa XS 4.0.
Reset the Unit: 29
You can reset the unit without disconnecting the power. If you must reset the unit, please contact your
installation dealer as this may indicate a larger problem with the system and/or its installation.
IMPORTANT: Once you press the (#) key, the unit will reset, exit out of the programming mode, and play the
restart chime following the reset.
1
Press Then
2
Enter Then
1
Press Then
2
Enter Then
Delete ALL Access Codes from Database: 206
Proceed With CAUTION! This will delete ALL Access Codes from unit. (Directory, Entry, Card and Remote
Control).
IMPORTANT: Once you delete ALL of the access codes, you cannot restore them to the database unless they
are saved in Versa XS 4.0.
1
Press Then
2
Enter Then
RESET/RESTORE THE UNIT AND DATABASE
If you make an error during an entry, press the asterisk key (*) to begin again.
Enable or Disable Real-Time Monitoring: 24
1
Press Then
2
Enable (1) or Disable (0). Then (#)
Enables/Disables real-time transaction monitoring. Factory Setting: Disabled
REAL-TIME MONITORING
1 2
EXAMPLE:
Enables the real-time monitoring.
Loading ...
Loading ...
Loading ...