Loading ...
Loading ...
Loading ...
19
(NPB / Single Family Residence ONLY)
You can send commands directly to the unit from your phone without being in programming mode. This feature is
only available from a single-family residence or a manager who is sharing a phone line with the unit.
To Enter a Direct Command from a Residence Phone:
1
Lift the receiver and press
NOTE: If multiple units are sharing the same phone line, then a Unit ID Code (1-7) will need to be
entered at this time. See next page for more information about Multiple Unit Sites.
The unit is now ready to allow direct commands only!
EXAMPLE 1:
Enters direct command mode.
EXAMPLE 2:
Enters direct command mode for unit three.
SENDING DIRECT COMMANDS FROM THE RESIDENT’S PHONE
Loading ...
Loading ...
Loading ...