Loading ...
Loading ...
Loading ...
24
Step 3 Assign "Each" Door Number to One or More Relays: 61
When a valid access code is used at an external access control device (Door), the unit can be set to activate one
or more relays. Factory Settings: Door 1 Activates Relay 1; Door 2 Activates Relay 2; Door 3 Activates
Relay 3; Door 4 Activates Relay 4
1
Press
Then
2
Enter the Door Number (1-4). Then (#)
3
Enter Relays to be Activated (0000-1111). Then (#)
0=Deactivate, 1=Activate (1st digit=Relay 4, 2nd digit=Relay 3, etc.)
IMPORTANT: 1-3 must be
performed for EACH Door Number
assigned to the unit.
1 2 3
Relay 4 Relay 3 Relay 2 Relay 1
Deact Deact
Activate Activate
When a Resident uses a Valid Code at "Door 1", Relay "1" and Relay "2" will Activate
Step 4 Assign Each External Access Control Device a "Door Number": 60
The units can be equipped with Wiegand reader and radio frequency (RF) modules that allow your system to
accommodate external access control devices such as a Wiegand-compatible card readers (keypad) and RF
receiver. In order for Wiegand devices to work successfully, you must assign them a "Door Number". When a
valid access codes is presented to the device, the Assigned Door’s Relays will activate. Factory Setting:
To perform these 4 steps you MUST know EXACTLY where the External Access Control Device(s) are wired
in "Your" unit! When pages 13 and 23 are completed by you or your installer, they will help you
understand "Your" personal layout. If you do not know this, DO NOT PROCEED. Consult your Installer and/or
refer to the installation manual for assistance.
1
Press Then
2
Enter External Access Control Device Number (1-4). Then (#)
Internal Keypad is ALWAYS Assigned to External Access Control Device Number 0.
3
Assign a Door Number (1-4) to the Device. Then (#)
IMPORTANT: 1-3 must be
performed for EACH external
access control device of unit.
NOTE: A "Door Number" is a number you
assign to each external access control
device. Only Wiegand devices may be
assigned to a door.
1 2 3
1 2 3
Door 1 Door 1
Main Keypad Device 1
Door 2
Device 2
Door 3
Device 3
Door 4
Device 4
EXAMPLE:
EXAMPLE A:
EXAMPLE B:
Device "1" is Assigned as Door "3".
Device "3" is Assigned as Door "4".
Loading ...
Loading ...
Loading ...