Loading ...
Loading ...
Loading ...
16
ENTER PROGRAMMING MODE ***
If you will be programming the unit via modem, please refer to LiftMaster.com/SoftwareDownload.
IMPORTANT: After entering programming mode for the first time, we suggest you change the password to maintain
the security of your system (see page 51).
From the Keypad:
From the Residence Telephone:
1
When you lift the receiver, press
NOTE: If multiple units are sharing the same phone line, then a Unit ID Code (1-7) will need to be entered at
this time. See page 20 for more information about Multiple Unit Sites.
2
Enter the six-digit password. The default is six zeroes.
3
Press and the audio tone will stop.
The unit is now ready to accept programming instructions!
From the Remote Telephone:
1
Dial the unit’s phone number:
NOTE: If the unit and an answering machine (or answering service) utilize the same phone line, let the line ring
at least two times, hang-up, and call back within one minute. The unit will answer on the second call. If the unit
does not answer, you may need to change the ring count (see page 53).
2
When the unit picks up the call, you will hear the audio message: "Please enter password"
3
Press
NOTE: If multiple units are sharing the same phone line, then a Unit ID Code (1-7) will need to be entered at
this time. See page 20 for more information about Multiple Unit Sites.
4
Enter the (6) six-digit password. The default is six zeroes.
5
Press and the audio will stop.
The unit is now ready to accept programming instructions!
EXIT PROGRAMMING MODE 0
• Press on the unit keypad and the unit will respond with audio feedback when disconnecting.
• Press on the telephone and the unit will respond with audio feedback when disconnecting.
Press when using a telephone or the unit to cancel programming sequence and exit programming mode.
1
Press
2
Enter the six-digit password. The default is six zeroes. Voice Feedback
NOTE: If the unit is an EL2000SS, you may either follow the menu instructions, or enter "2", to manually enter
program steps.
Loading ...
Loading ...
Loading ...