Loading ...
Loading ...
Loading ...
38
ACTIVATE OR DEACTIVATE AN ENTRY CODE: 56
This allows you to activate or deactivate an Entry Code, also on a specific date and time.
Delete ALL Entry Codes: 202
1
Press Then
2
Enter Then
This will delete ALL Entry Codes from unit.
IMPORTANT: Once you delete the Entry Codes, you cannot retrieve them unless they are saved in Versa XS 4.0.
VERIFY AN ENTRY CODE: 55
Activate / Deactivate an Entry Code:
1
Press Then
2
Enter Entry Code (3-9 digits). Then (#)
3
Activate Entry Code, (Enable-1 or Disable-0).
Then (#)
4
Use Start Activation Date, (Enable-1 or Disable-0).
Then (#)
To Activate or Deactivate an Entry Code:
4A
Start Date (yymmdd). Then (#)
4B
Start Time (hhmm). Then (#)
5
Use End Deactivation Date, (Enable-1 or
Disable-0). Then (#)
5A
End Date (yymmdd). Then (#)
5A
End Time (hhmm). Then (#)
NOTE: All time must be entered using a
24-hour format (8am=0800, 3pm=1500 etc.).
Verify that an Entry Code exists in the unit’s database.
1
Press Then
2
Enter Entry Code (3-9 digits). Then (#)
Audio Feedback "Invalid Step": Indicates the code Does Not exist in the database.
Audio Feedback "Valid Step": Indicates the code Exists in the database.
Disabling the Activate Entry Code
3
, the Entry Code will always be deactivated. If you enable the Activate Entry Code
3
, then the four If statements could apply:
1. If you disable the Start Activation Date
4
and disable the End Deactivation Date
5
and omit all dates and times, the
Entry Code will immediately become active and stay that way until the code is deactivated or deleted.
2. If you enable the Start Activation Date
4
and add only a "Start Date and Time"
4A
4B
and disable the End
Deactivation Date
5
, the Entry Code will activate on that "Start Date and Time".
3. If you disable the Start Activation Date
4
and enable the End Deactivation Date
5
and add only an "End Date and
Time"
5A
5B
, the Entry Code will deactivate on that "End Date and Time".
4. If you enable the Start Activation Date
4
and add a "Start Date and Time"
4A
4B
enable the End Deactivation Date
5
and add an "End Date and Time"
5A
5B
, the Entry Code will activate on that "Start Date and Time" and deactivate on
the "End Date and Time".
If you make an error during an entry, press the asterisk key (*) to begin again.
Loading ...
Loading ...
Loading ...