Loading ...
Loading ...
Loading ...
4
GUIDE FOR KEYPAD PROGRAMMING THE UNITS
Optional Steps Indicated in BOLD type, all other steps are Required.
Programming
Number
Page Description of Task
Factory
Setting
Programming
Procedure
***
16
Entering Programming Mode
***
(6 Digit Password)
016
Exiting Programming Mode 0 #
151
Change or Verify the Unit’s
Password
000000
1 # (1 to change; 2 to verify) # (six-digit
coded) #
220
Set Unit ID Number and No. in Chain Unit ID 1,
Chain No. 1
2 # (unit ID number, 1-7) #
(Number of Units in Chain, 1-7) #
347
Set the Clock 3 # yymmdd # (day of the week) # hhmm #
447
Enable/Disable Daylight Savings
Time
Enabled 4 # (0=disable; 1=enable) #
557
Set Visitor Talk Time 60 Seconds 5 # (15-250 seconds) #
629
Set Directory Code Length 3 Digits 6 # (1-4 ) #
735
Set Entry Code Length 4 Digits 7 # (3-9) #
955
Enable/Disable Call Waiting Enabled 9 # (0=disable; 1=enable) #
10 31
Enable/Disable Do Not Disturb
Schedule
Disabled 10 # (directory code) # (0=disable;
1=enable) #
11 46
Enable/Disable Unlock Schedule Enabled 11 # (0=disable; 1=enable) #
12 48
Enable/Disable Anti-Passback Disabled 12 # Enable/Disable True Anti-Passback
(0=disable; 1=enable) # Enable/Disable
Timed Anti-Passback (0=disable; 1=enable) #
13 48
Set Anti-Passback Time 3 Minutes 13 # (1-60 minutes) #
14
Set Maximum Number of Rings
Allowed Before Aborting Attempt
5 Rings 14 # (1-9) #
15
Set Standard Single Ring or Double
Ring Response
1=Double
Ring
15 # (0-1; 0=one long ring, 1=double ring)
#
16 53
Number of Rings Before Unit
Answers
5 Rings 16 # (0-15) # Each unit in chain must have
same setting
17 50
Set “Strikes and Out” 3 Errors 17 # (max errors, 0-5) #
18 54
Set Speaker
Set Voice Response Volume
Set Beep Response Volume
5, 2, 2 18 # (0=mute; 1-10, 1 is low and
10 is high) # (0=mute; 1=low;
2=medium; 3=high) # (0-3) #
19 54
Set Microphone Volume 5 19 # (0=mute, 1-10, 1 is low and 10 is
high) #
20 53
Enable/Disable the Telco Mode Enabled 20 # (0=disable; 1=enable) #
21 63
Enable/Disable Direct Commands Enabled 21 # (0=disable, 1=enable) #
22 56
Enable/Disable Voice Mail Disabled 22 # (0=disable, 1=enable) #
23 56
Enable/Disable Access Granted
Beeps
Enabled 23 # (0=disable, 1=enable) #
24 66
Enable/Disable Real-Time Monitoring Disabled 24 # (0=disable, 1=enable) #
25 57
Return to Menu Programming 25 #
26 57
Enable/Disable “Announce All Doors/
Access Granted”
Disabled 26 # (0=disable, 1=enable) #
IMPORTANT: The Pound Key (#) must be used as Data Field Separator and to Save Data at the end of the sequence.
Time must be entered using a 24-hour format (8am=0800, 3pm=1500 etc.). If you make an error during an entry,
press the asterisk key (*) to begin again.
QUICK REFERENCE GUIDE
Loading ...
Loading ...
Loading ...