Loading ...
Loading ...
Loading ...
43
VERIFY A CARD: 86
Verify that a card exists in the unit’s database.
Audio Feedback "Invalid Step": Indicates the card Does Not exist in the database.
Audio Feedback "Valid Step": Indicates the card Exists in the database.
ENABLE OR DISABLE IGNORE THE FACILITY CODE WHEN
A CARD IS USED:
74
1
Press Then
2
Enable (1) or Disable (0). Then (#)
1
Press Then
2
Enter Card Number (1-65534 [26 or
30-bit]). Then (#)
3
Enter Facility Code (0-63 [30-bit] or 0-255 [26-bit]).
Then (#)
4
Card Type (26 or 30). Then (#)
21
3 4
Then System Beeps ONCE
Card number "43323" with Facility Code "1" and Card Type "30" is NOT valid.
FACILITY CODES
Cards may be assigned facility codes that help identify one group from another, useful when managing multiple
buildings/complexes.
Unit will ignore Facility Codes when enabled. Factory Setting: Enabled.
SET THE DEFAULT FACILITY CODE: 73
1
Press Then
Set a default Facility Code for 26-bit or 30-bit cards. If you set a default Facility Code, every time a card is
entered without one, the default Facility Code will be used. Factory Setting: 0.
2
Enter Facility Code (0-63 [30-bit], 0-255 [26-bit]).
Then (#)
NOTE: If you assign a default Facility Code greater than 63, all 30-bit cards entered without a Facility Code will
be invalid. 30-bit cards have a Facility Code range of 0-63. 26-bit cards have a Facility Code range of 0-255.
Sets the default Facility Code for 26-bit or 30-bit cards to "1"
CARD TYPES
SET THE DEFAULT CARD TYPE:
71
1
Press Then
2
Card Type (26 or 30). Then (#)
Use this to set a default card type (Standard 26-bit or Sentex 30-bit). If you set a default card type, every
time a card is entered without one, the default card type will be used. Factory Setting: Sentex 30-bit.
1 2
1 2
The EL Models accept two card types: Standard 26-bit cards or Sentex 30-bit cards.
EXAMPLE:
EXAMPLE:
Sets the default card type to the Standard 26-bit.
EXAMPLE:
Loading ...
Loading ...
Loading ...