Loading ...
Loading ...
Loading ...
54
©
2021 DJI All Rights Reserved.
DJI TERRA
User Manual
Shared Directory
C:/Users/dji/Desktop/djiterra
Temporary Local Directory
C:/Users/worker/Desktop/temp
Automatically launch after powering on
Start
Stop
Log
American English
1. Shared Directory: set the shared directory. The setting must be same as the setting in the control
device.
2. Temporary Local Directory: used for temporary storage while the worker device is performing a
reconstruction. Select a local directory in the worker device as the temporary local directory and
make sure that there is enough disk space.
3. Start/Stop: to start or stop the worker device. Once started, a worker device can be searched for
and used by the control device in the local network.
4. Log: print the logs of the worker device.
5. Language Switch: click the language switch on the upper right corner to switch language.
6. Automatically launch after powering on: if enabled, the DJI Terra Engine will launch automatically
after the worker device is powered on.
Cluster Reconstruction Procedure
1. Make sure you have already congured the parameters related to cluster reconstruction and
selected the worker devices.
2. Start reconstruction following the normal procedure for reconstruction missions and make sure
to use cluster reconstruction.
3. View the mission progress rate and status of worker devices in reconstruction mission
management.
4. If automatically copying results to the control device is disabled and the control device is still
connected to the shared directory after the cluster reconstruction, users can view the reconstruction
results in DJI Terra and also in the les in the corresponding folders.
If automatically copying results to the control device is enabled, users can view the reconstruction
results in DJI Terra without being connected to the shared directory and also in the files in the
corresponding folders.
Loading ...
Loading ...