Loading ...
Loading ...
Loading ...
Message
code
Message Solution
W-2404 Power Cleaning cannot be completed. Cleaning cannot be executed because there is not enough
available space in the maintenance box for the waste ink
that is ejected during Powerful Cleaning. To execute
cleaning, replace the maintenance box with a new one. The
maintenance box that was removed can be reinstalled and
used again after cleaning is complete.
U “Replacing the Maintenance Box” on page 53
W-5202 Amount of data in print jobs sent to
printer is at maximum limit.
Print job data is too large.
Delete all the print jobs, and then split up the print job to
print it.
W-5204 Nozzle check is recommended. Nozzles may be clogged because the print head unit was
stopped for a long period outside the specified position. We
recommend doing a nozzle check to check for clogged
nozzles, and then to clean the heads if necessary.
U “Print Head Nozzle Check” on page 60
W-5210 Mismatch between the paper size
settings on your computer and printer.
The paper settings set in the printer driver are different from
the paper settings set on the screen of the printer’s control
panel. Check the screen on the control panel of the printer.
W-5211 Mismatch between the paper type
settings on your computer and printer.
W-5212 Mismatch between the print settings on
your computer and printer.
W-5213 Paper size error or multi-page feed error
W-1401 The transportation lock is in the locked
(transporting) position.
You cannot print if the transportation lock is in the
transportation position.
Set the transportation lock to the print position according to
the instructions on the screen on the control panel of the
printer.
W-1309 The printer’s internal unit has been
pulled out.
You cannot print because the printer’s internal unit is pulled
out.
Return the printer’s internal unit back to its original position
according to the instructions on the screen on the control
panel of the printer.
I-2501 Printing speed is slow because the
printer’s internal temperature is too high.
Printing can continue even though the print speed is
reduced. To recover the print speed, pull out the interior of
the printer and open the inner cover and leave like that for
15 to 30 minutes. Leave the printer’s power on while it is
standing by.
See the following for more details on the solution.
U “Print speed suddenly slows down while printing
continuously” on page 134
E-5101 - Check the condition of the wireless LAN and communication
cables for the printer and computer, and then turn the
printer’s power off and on again.
If the situation is still not improved, then repairs are needed.
Contact your dealer or Epson Support.
SL-D500 Series User's Guide
Problem Solver
126
Loading ...
Loading ...
Loading ...