Loading ...
Loading ...
Loading ...
60
connect.
Beacon interval Enter a beacon interval value (in ms) between 40 and
3500. This determines the delay in ms between each
information beacon broadcasted by the AP.
DTIM interval Enter a DTIM interval value between 1 and 255. This
determines the delay between each Delivery Traffic
Indication Map (DTIM). The value represents the
number of beacons sent before a DTIM is sent.
Preamble mode Choose a preamble mode. This determines the data
string length for error checking purposes.
Long: Slower, but more accurate.
Short: Faster, but less accurate.
Protection Mode Select a protection mode from the drop-down menu.
None: No protection applied.
CTS-to-Self Protection: mode for mixed-mode
environments with 802.11b devices.
UAPSD Choose to enable or disable Unscheduled Automatic
Power Save Delivery (UAPSD). This feature allows
connected clients to save power.
Short guard interval Choose to enable or disable Short Guard Interval. This
reduces. This reduces signal loss from the multipath
effect where multiple signals reach the receiving
antenna at different times.
5. Click Save.
6. Click Push Configuration.
8.1.12 Configuring General Profile
Settings
From the General Profile settings, users can configure a proxy server to route traffic and enable
IPv6 support.
1. Navigate to the Configure > Access Point > Profiles page.
2. From the Profile list, click Settings under the Actions column of the Profile you wish to
edit general settings for.
Loading ...
Loading ...
Loading ...