Loading ...
Loading ...
Loading ...
45
Using WPA, WPA+WPA2 With 802.1X
Enterprise (RADIUS) Authentication
1. Navigate to the Configure > Access Point > Profiles page.
2. From the Profile list, click SSID under the Actions column of the Profile of the SSID you
wish to edit.
3. From the SSID list, click the SSID name of the SSID you wish to edit.
4. In the SSID configuration window, click the Basic tab.
5. From the Security drop-down menu, select WPA or WPA+WPA2.
6. From the Auth Method drop-down menu, select RADIUS.
7. [Optional] If you have no preconfigured RADIUS servers, click Add a RADIUS server
and specify the following information:
Host Enter the IP address of the RADIUS server.
Port Enter a port for the RADIUS server. The range is
between 1 and 65535.
Secret Enter a shared secret.
8. Select a primary RADIUS server database from the drop-down menu.
9. [Optional] Select a secondary RADIUS server database from the drop-down menu.
10. Specify the following information:
Encryption Select an encryption method.
Group key update
interval
Set the interval (in seconds) at which the group key is
updated for the SSID. The default is 3600 seconds.
11. Choose to enable or disable SSID broadcasting.
Note: If SSID broadcasting is disabled, users will not see the SSID on their device.
12. Check the wireless bands to enable. If both bands are enabled, choose to enable or
disable band steering which automatically connects compatible clients to the 5 GHz
band.
13. Choose to enable or disable guest access mode.
Note: Enabling guest access will make this SSID an isolated guest network and will
automatically enable NAT mode and station isolation. This prevents external clients
from connecting to the internal network.
14. Choose to enable or disable Network Address Translation (NAT mode).
Note: This is enabled by default if guest access mode is enabled.
Loading ...
Loading ...
Loading ...