Loading ...
Loading ...
Loading ...
38
4
Close the cover.
Press the cover until it snaps shut.
When you set the power switch to
<1>, the number of possible shots will
be displayed on the LCD monitor.
After opening the card slot/battery compartment cover, be careful not to swing
it back any further. Otherwise, the hinge may break.
The number of possible shots varies depending on the remaining capacity of
the card, image-recording quality, ISO speed, etc.
Setting [z: Release shutter without card] to [Disable] will prevent you
from forgetting to insert a card before shooting (=
260).
Removing the Battery and Card
1
Set the power switch to <2>
(=
41).
2
Open the cover.
Make sure the access lamp is off,
then open the cover.
If [Saving...] is displayed, close the
cover.
3
Remove the battery.
Press the battery lock lever as shown by
the arrow and remove the battery.
To prevent short-circuiting, be sure to
attach the provided protective cover
(=
35) to the battery.
(
2
)
(
1
)
Loading ...
Loading ...
Loading ...