Loading ...
Loading ...
Loading ...
251
Sound recordingN
Normally, the built-in microphones
will record the sound in stereo. If the
Directional Stereo Microphone DM-E1 (sold
separately) is connected to the camera’s
external microphone IN terminal (=
28),
the external microphone will be given the
priority.
(1) Level meter
[Sound rec./Rec. level] options
[Auto] : The sound-recording level is adjusted automatically.
Auto level control will operate automatically in response
to the sound level.
[Manual] : For advanced users. You can adjust the sound-
recording level to one of 64 levels.
Select [Rec. level] and press the <Y> <Z> keys while
looking at the level meter to adjust the sound-recording
level. Look at the peak hold indicator (approx. 3 sec.),
and adjust so that the level meter sometimes lights up
on the right of the “12” (-12 dB) mark for the loudest
sounds. If it exceeds “0”, the sound will be distorted.
[Disable] : Sound will not be recorded.
[Wind lter]
When set to [Auto], it reduces wind noise when there is wind outdoors.
This feature works only when you use the built-in microphones for
movie shooting. When the wind lter function takes effect, part of the
low bass sounds will also be reduced.
[Attenuator]
Automatically suppresses sound distortion caused by loud noises.
Even if [Sound rec.] is set to [Auto] or [Manual] for shooting, sound
distortion may still result if there is a very loud sound. In such a case,
setting it to [Enable] is recommended.
If you use the Wi-Fi (wireless communication) function with an external
microphone, the sound noise may be recorded. During sound recording,
using the wireless communication function is not recommended.
(
1
)
Loading ...
Loading ...
Loading ...