Loading ...
Loading ...
Loading ...
203
Magnified View
To check the focus when the AF method is
other than [u+Tracking], magnify display
by approx. 5× or 10× by pressing the <u>
button or tapping [Y] in the lower right.
Magnied view is not available with
[u+Tracking].
To move the AF point, press the <V> cross keys or tap on the spot
you want to magnify.
Either press the <u> button or tap on [Y] to magnify the area
covered by the magnifying frame. Each time you press the <u> button
or tap on [Y], the magnication ratio changes.
Magnication is centered on the AF point for [Spot AF], and [1-point
AF] and is centered on the Zone AF frame for [Zone AF].
Autofocusing is performed with magnied display if you press the
shutter button halfway when set to [1-point AF], or [Spot AF]. When
set to other AF methods, autofocusing is performed after restoring
normal display.
With Servo AF, if you press the shutter button halfway in the magnied
view, the camera will return to the normal view for focusing.
If focusing is difcult in the magnied view, return to the normal view and
perform AF.
If you perform AF in the normal view and then use the magnied view,
accurate focus may not be achieved.
AF speed differs between normal view and magnied view.
When in magnied view, Movie Servo AF (=
253) will not function.
With the magnied view, achieving focus becomes more difcult due to
camera shake. Using a tripod is recommended.
Loading ...
Loading ...
Loading ...