Loading ...
Loading ...
Loading ...
- 47 -- 47 -
4. Recording Videos - Recording Videos
Screen Displays While Video Recording
The video recording time
D
and elapsed recording time
E
will be displayed.
●
The recording state indication
F
and card access indication
G
turn red while videos are being recorded.
24
m
59
s
24
m
59
s
10
S
10
S
●
When the remaining capacity of the battery or card gets low during video recording, the tally lamps blink at long intervals.
When there is no remaining capacity in the battery or card, video recording is stopped and the tally lamps blink at short
intervals.
●
If an operation such as a zoom or button operation is performed during video recording, that operation sound may be
recorded.
●
The lens operation sound (AF and image stabilizer) may be recorded to video.
●
If the operation sound of pressing the video rec. button to end recording bothers you, try the following:
– Record by remotely operating the camera (
213 / 12. Remote Operations)
– Connect a remote control unit (commercially available) that is compatible with the camera to the [REMOTE] terminal
to record.
●
Depending on the type of card, the card access indication may appear for a while after video recording. This is not a
malfunction.
●
Even when playback is performed on a supported device, situations may occur where image or sound quality is poor,
recording information is not displayed correctly, or playback is not possible, for example. If you experience any of these,
play them back on the camera.
●
If the camera temperature rises, [
] may be displayed and recording may stop. Wait until the camera cools down.
●
You can change the tally lamp that turns on. You can also change the settings so the tally lamps do not turn on:
[
] [ ] [Tally Lamp] ( 200 / [Tally Lamp])
●
You can display a red frame on the recording screen that indicates that video is being recorded:
[
] [ ] [Red REC Frame Indicator] ( 199 / [Red REC Frame Indicator])
Loading ...
Loading ...
Loading ...