Operating Instructions / Owner’s Manual - Page 206

For DC-BS1H.

Loading ...
Loading ...
Loading ...
- 206 -- 206 -
11. Menu Guide - [Setup] menu
[Save/Restore Camera Setting]
[Save] / [Load] / [Delete] / [Keep Settings While Format]
Saves the camera’s settings information to the card. Saved settings information can be loaded to the camera, letting you set
the same settings on multiple cameras. (
177 / [Save/Restore Camera Setting])
[Reset]
Returns the camera to its default settings. ( 45 / [Reset])
[Setup] menu ([Others])
[Clock Set]
Sets the date and time. ( 30 / Clock Set)
[Time Zone]
Sets the time zone. ( 32 / Time zone)
[System Frequency]
[59.94Hz (NTSC)] / [50.00Hz (PAL)] / [24.00Hz (CINEMA)]
* Default setting specifications vary depending on the country or area where the camera was purchased.
This changes the system frequency of videos that are recorded and played back. (
50 / [System Frequency])
[Device Name]
This will set the camera name (32 characters or less). For information on how to enter characters ( 212 / Entering
Characters
)
The set name will be displayed as the individual ID for SSID during Wi-Fi connection or Tethered recording.
When Tethered recording using several cameras, it is recommended to set an individual device name for each camera.
[Pixel Refresh]
This optimizes the image sensor and image processing.
The image sensor and image processing are optimized when the camera is purchased. Use this function when bright
spots that do not exist in the subject get recorded.
When performing pixel refresh, block the lens from light with a body cap etc.
Turn the camera off and on after the pixels are corrected.
Loading ...
Loading ...
Loading ...