Loading ...
Loading ...
Loading ...
Shooting
2
44
EN
Pro Capture
In Pro Capture mode, the camera records pictures at a rate of about 10 frames per
second, starting approximately 0.5 seconds before the shutter button is pressed all the
way down. Use this mode to capture moments you might otherwise miss due to shutter
lag.
Shutter button pressed
halfway
Shutter lag
Up to 5 frames
Burst shooting
continues
Shutter button pressed all
the way down
Moment you
want
To eliminate the lag between the shutter button being pressed all the way down and the
start of recording, the camera starts shooting a series of pictures using the electronic
shutter when the shutter button is pressed halfway, and begins recording the pictures—
including those taken when the shutter button was pressed halfway (up to 5)—to the
card when the shutter button is pressed all the way down.
1
Press the jY (G) button.
2
Highlight J (Pro Capture) using HI or the control dial and press the Q
button.
3
Press the shutter button halfway to start shooting.
4
Press the shutter button all the way down to start recording to the card.
The camera will continue shooting for up to a minute while the shutter button is pressed
halfway. To resume shooting, press the button halfway again.
Flickering occurred by uorescent lights or the large movement of the subject, etc. may
cause distortions in images.
The monitor will not be blacked out and the shutter sound will not be emitted while
bracketing.
The slowest shutter speed is limited.
Loading ...
Loading ...
Loading ...