Loading ...
Loading ...
Loading ...
Cautions
8
125
EN
Using Separately Sold Accessories
Attaching optional silicone jackets
Attach the jacket as shown. Reverse the steps to remove the jacket.
• Do not use excessive force. Failure to observe this precaution could damage the jacket.
Taking pictures with the Olympus Wireless RC Flash System
You can take pictures and underwater pictures with a wireless fl ash when using a fl ash
compatible with the Olympus Wireless RC Flash System.
The guideline of the setup range in wireless fl ash shooting is from 1 to 2 m, however
note that it varies depending on the ambient environment.
• The camera’s built-in fl ash is used for communication between the camera and fl ash.
• To use a dedicated underwater strobe, prepare an underwater case, a fi ber-optic cable
and so on.
• For details about operation of a wireless fl ash and an underwater strobe, refer to the
instruction manual for a special external fl ash or an underwater case.
1
Turn on the dedicated strobe.
2
Set the flash mode of the dedicated strobe to RC mode.
• When you have to set a channel and a group, select CH1 for the channel, A for the
group.
3
Highlight fl ash settings in live controls and select [#RC] (remote control).
• “Using a fl ash (Flash photography)” (P. 45)
4
Take a test shot to check the operation of the fl ash and the resulting image.
• Be sure to check the charge level of the camera and wireless fl ash before taking pictures.
• When the camera fl ash is set to [#RC], the camera built-in fl ash is used for
communication with the wireless fl ash. It cannot used for taking pictures.
• To take pictures with a wireless fl ash, point the remote sensor of the special external fl ash
toward the camera, and point the fl ash in the direction of the subject.
Loading ...
Loading ...
Loading ...