Loading ...
Loading ...
Loading ...
555
Troubleshooting Guide
If the power is turned off while an image is being recorded to the
card, the access lamp will remain on or continue to blink for a few
seconds. When the image recording is completed, the power will
turn off automatically.
Do not use any battery other than genuine Canon Battery Pack
LP-E6N/LP-E6.
Remove and install the battery again (p.44).
If the electrical contacts are dirty, use a soft cloth to clean them.
Use a fully-charged battery (p.42).
The battery performance may have degraded. See [53: Battery
info.] to check the battery’s recharge performance level (p.526). If
the battery performance is poor, replace the battery with a new
one.
The number of possible shots will decrease with any of the
following operations:
• Pressing the shutter button halfway for a prolonged period.
• Activating the AF frequently without taking a picture.
• Using the lens’s Image Stabilizer.
• Using GPS.
• Using the LCD monitor frequently.
• Continuing Live View shooting or movie shooting for a prolonged
period.
• Using the Wi-Fi/NFC (wireless communication) function
frequently.
• The Eye-Fi card’s transmission is enabled.
The access lamp still lights or blinks even when
the power switch is <2>.
[Does this battery/do these batteries display the Canon logo?]
is displayed.
The battery becomes exhausted quickly.
Loading ...
Loading ...
Loading ...