Loading ...
Loading ...
Loading ...
503
7 Custom ControlsN
While the metering timer is active, when you press the depth-of-field
preview button or the lens’s AF stop button, the focusing point can be
switched to the registered AF point.
*4: On the setting screen, when you press the <B> button, you can select [Switch
only when btn is held] or [Switch each time btn is pressed]. To register the AF
point, see page 500.
While the metering timer is active, pressing the <p> (AF area
selection) button will switch between the current AF point and the center
AF point or registered AF point.
*5: On the setting screen, when you press the <B> button, you can select [Switch
to center AF point] or [Switch to registered AF point]. To register the AF point,
see page 500.
While the metering timer is active, you can select an AF point directly
with the <5> or <9> dial without pressing the <S> button.
*6: With the Quick Control Dial setting screen
displayed, you can press the <B> button, then
set the direction for switching the AF point for
when the <5> dial is turned. The [Direction: AF
point switching] settings for [Horizontal] and
[Vertical] will work for Single-point Spot AF,
Single-point AF, Man. select.c: AF point
expansion, and Expand AF area: Surround. The
[Direction: Zone AF frame switch] settings for
[Cycle through the zones], [Horizontal], and [Vertical] will work with Zone AF.
*7: On the Multi-controller setting screen, you can press the <B> button and select
the AF point ([Switch to center AF point] or [Switch to registered AF point]) the
camera switches to when you press the center of <9>. To register the AF point, see
page 500.
: Switch to registered AF point
: Selected AF point z Center/Registered AF point
:Direct AF point selection
If you assign [Direct AF point selection] to <5> and you want to change
the aperture in the <a> mode, hold down the <A> button and turn the
<6> dial.
Loading ...
Loading ...
Loading ...