Loading ...
Loading ...
Loading ...
325
Focusing with AF (AF Method)
In the [FlexiZone - Multi] and
[FlexiZone - Single] modes, either press
the <u> button or tap on [d] displayed
on the bottom right of the screen. You
can magnify the image by approx. 5x or
10x and check the focus.
Magnified view is not possible with
[u+Tracking].
To move the AF point or select a zone, operate <9> or tap on the
spot you want to magnify.
Either press the <u> button or tap on [d] to magnify the image.
Each time you press the <u> button or tap on [d], the
magnification ratio changes.
When [FlexiZone - Multi] is set, the image will be magnified at the
center of the zone frame (or image center with automatic selection).
When [FlexiZone - Single] is set, the image will be magnified at the
AF point.
At 100% (approx. 1x) magnification, operate <9> or tap on the
screen to move the magnifying frame. Pressing <9> or <0> will
return the magnifying frame to the screen center.
Either press the <u> button or tap on [d] to magnify the area
covered by the magnifying frame.
When the image is magnified by approx. 5x or 10x, you can change
the magnified area by operating <9> or tapping on the triangle on
the screen top, bottom, left, or right.
When you press the shutter button halfway, the normal view will
return for [FlexiZone - Multi]. For [FlexiZone - Single], AF will
proceed with the magnified view.
With Servo AF and magnified view, pressing the shutter button
halfway will return to the normal view for focusing.
Magnified View
Loading ...
Loading ...
Loading ...