Loading ...
Loading ...
Loading ...
91
5
Cleaning the Scanner Glass
If there are unwanted vertical lines in the scanned
image or if scanning cannot be done cleanly, the
scanning area of the scanner may have become
dirty. Clean the scanner glass inside the machine.
a Turn off the machine, unplug the power cord
from the electrical outlet, and then disconnect
the AC power cord from the AC power jack on
the back of the machine.
b Store away the operation panel.
c Turn the machine upside down, and then pull
out the rear tray.
d Pull the rear tray release lever (at the bottom of
the machine), and then remove the cover.
Pull out the rear tray to remove it together with the
cover.
a Rear tray release lever
e Dampen a soft lint-free cloth with water and
firmly wring it out, and then wipe the scanner
glass inside the machine.
f Attach the cover to the machine.
• Push in the cover until it snaps into place.
g Push in the rear tray.
hAfter cleaning, perform a test scan.
a
Loading ...
Loading ...
Loading ...