SDX85M User Manual

Loading ...

Installing and Uninstalling the Holder

Select the holder appropriate for the material, and

then install it into the machine. For details on the

holder appropriate for the material, see “Blade and

Material Combination” on page 23.

a Press in the operation panel to turn on the

machine.

For details, see “Turning On/Off the Machine” on

page 8.

Note

• Be sure to turn on the machine before installing

the holder.

• If the holder is installed while the machine is off,

the blade may break and material may not be

cut cleanly.

b Remove the protective cap.

WARNING

• This is not a toy and is not intended to be used

by children. In order to prevent choking

hazards, do not allow infants/children to put the

protective caps in their mouths.

CAUTION

• Please remove protective cap from blade

holder before placing it into the machine

carriage.

• Do not press the tip of the holder with your

hand or fingers because the tip of the blade will

extend and may result in injuries.

c Grasp the holder grip, and then insert the

holder into the carriage.

a Grip

d Push down on the holder lock lever.

Firmly push down until the holder is locked in place.

a Holder lock lever

e Reverse the installation procedure to uninstall