Loading ...
Loading ...
Loading ...
26
■ Loading the Mat
a Attach the material that will be cut to the mat.
• For details on attaching material to the mat, see
“Attaching the material to the mat” on page 16.
b While holding the mat level and lightly
inserting it into the feed slot, press in the
operation panel.
Insert the tip of the mat so that it aligns with the guides
on the left and right sides of the feed slot and is tucked
under the feed rollers. Insert the end of the mat marked
with an arrow into the machine.
a Guides
b Feed rollers
The mat is fed in to complete the preparations for
cutting.
Note
• Do not forcefully pull the mat while it is being
fed in. Otherwise, damage, for example, to the
feed rollers, may result.
■ Cutting
a Select “Cut” in the test screen.
Note
• To make half cuts (kiss cuts), turn on half cut
(kiss cut) in the settings screen. For details on
specifying the settings, see “Half Cut (Kiss Cut)
Settings” on page 28.
b Touch the "Start" key to start cutting.
When cutting is finished, the message “Finished
cutting.” appears on the display. Touch the “OK”
key to return to the test screen.
a
b
a
b
Loading ...
Loading ...
Loading ...