Loading ...
Loading ...
Loading ...
76
b Color recognition mode
The cutting data is created without converting the
illustration to grayscale.
Creating data in this mode may take some time.
* The default color recognition setting is the
grayscale recognition mode.
Examples of illustrations appropriate for
recognition mode:
Memo
• The edges of adjacent colors with the same
brightness, as shown below, cannot be
detected. In this case, use the color recognition
mode.
a “a” and “b” as well as “c” and “d” have the
same brightness.
c Scanning area
The scanning size settings screen appears. The size
of the scanning area can be selected. The available
scanning area sizes differ depending on the model.
d Attach the original to the mat, and then load
the mat into the feed slot.
• Lightly insert the mat into the feed slot, and press in
the operation panel.
• For details on loading the mat, see “Loading the
Mat” on page 26.
Memo
• Depending on the machine model, the sizes of
mats that can be used will differ. Check the
“Maximum Scanning Area” under “Machine
Information” of the settings screen.
e Touch the "Start" key to start scanning.
• When the scanner lever is raised, a confirmation
message appears.
For details, see step
g in “Scanning” of “Tutorial 3
- Scanning and Cutting” on page 69.
When scanning is finished, the scanned image
appears in the screen.
Example
Recommended
recognition
mode
Outlines that are
clear
Grayscale
recognition mode
•Distinct
difference in
brightness
between
background
and illustration
•Different
brightness of
adjacent colors
• Similar
brightness of
adjacent colors
Color recognition
mode
a
b
c
d
a
Loading ...
Loading ...
Loading ...