Loading ...
Loading ...
Loading ...
Part Number STH14 9/10 97
TIME DELAY AFTER DISPENSE
A time delay can be programmed into the control
board which will prevent the system from dispensing
another flavor for a period of from 0 to 10 seconds
following a dispense. The default is 0 seconds.
Enter the Time Delay mode by pressing the program
button until “d L A Y” is displayed. To check the current
delay time press any flavor button one time and the
current value will be displayed. To increase the time
(+) by 1.0 second increments press flavor button 1 (far
left button). To decrease the time (-) by 1.0 second
increments press flavor button 3 (far right button).
Flav’R-Pic External Programming
HOW TO CHECK FRP BRIX EXTERNALLY
If your FRP-250 has a control board with the external
brix check ability you will be able to put the unit into
brix mode by doing the following:
1. Turn the keyswitch to the "OFF" position.
2. With the keyswitch still in the "OFF" position, press
and hold the F1 touch pad button for the left side or
F5 for the right while turning the keyswitch back to the
"ON" position.
- F1 = Left Side Brix Check
- F5 = Right Side Brix Check
FRP-250 with Flavor Shots
S1
S3
S2
S4
S5
S7
S6
S8
F1
F2
F4
F3
N1
N3
N2
S12
S10
S11 S9
S16 S14
S15 S13
F5
F6 F8
F7
N4 N6
N5
Right Flavor
Shots
Left Flavor
Shots
Left Carb/
Non-Carb
Right
Carb/Non-
Carb
STH14.book Page 97 Thursday, September 23, 2010 3:35 PM
Loading ...
Loading ...
Loading ...