Loading ...
Loading ...
Loading ...
178 Part Number STH14 9/10
S/SV200/250/SV-250QD 8 Valve Diagram
S/SV200/250 10 Valve Diagram
3
PLUMBING: 3-1-1-1-2 MANIFOLDING
*OPTIONAL*
VARIETY VALVE ON #4
1 – WATER
(THRU COLDPLATE)
2 – SYRUP
(AMBIENT)
3 – SYRUP
(AMBIENT)
4 – SYRUP
(THRU COLDPLATE)
NOTE: SYRUP LINES NOT SHOWN
PRE-CHILL OUT
TO CARBONATOR
654321
2
4
3111
1,2,3 4 5 6
VALVES
CIRCUITS
CO
2
Manifold: Change to carbonated or non-carbonated water.
1. Rotate plunger 180° using a 5/32" Hex Key wrench.
2. Pull plunger up to get non-carbonated water.
3. Push plunger down to get carbonated water.
4. Turn plunger back 180° to lock.
5. Port 5 is not used.
Plain Water
(Plain Water Supply)
CARBONATOR OUT
TO POST-CHILL
Plain Water
(From
Pump to
Carbonator)
#1 #2 #3 #4 #5 #6
Syrup Lines
COLD PLATE
*EXTERNALLY CARBONATED UNITS: CARBONATOR IS REPLACED BY BY-PASS TUBE
FOR ASSISTANCE CALL (812) 246-7000
1
87
2
7,8
#7 #8
INTERNAL
CARBONATOR
TANK
(Optional)
VALVES
PLUMBING: 3-1-2-1-3 MANIFOLDING
PRE-CHILL OUT
TO CARBONATOR
654321
3121
1,2,3 4 5,6 7
VALVES
CIRCUITS
CO
2
Manifold: Change to carbonated or non-carbonated water.
1. Rotate plunger 180° using a 5/32" Hex Key wrench.
2. Pull plunger up to get non-carbonated water.
3. Push plunger down to get carbonated water.
4. Turn plunger back 180° to lock.
5. Port 5 is not used.
Plain Water
(Plain Water Supply)
CARBONATOR OUT
TO POST-CHILL
Plain Water
(From
Pump to
Carbonator)
#1 #2 #3 #4 #5 #6
Syrup Lines
COLD PLATE
FOR ASSISTANCE CALL (812) 246-7000
87
3
8,9,10
#7 #8
INTERNAL
CARBONATOR
TANK
(Optional)
10 9
#9#10
NOTE: SYRUP LINES NOT SHOWN
VALVES
STH14.book Page 178 Thursday, September 23, 2010 3:35 PM
Loading ...
Loading ...
Loading ...