Loading ...
Loading ...
Loading ...
122 Part Number STH14 9/10
The Quickdraw assembly is adjustable to assure the
wheel will always move freely. The assembly has two
adjustment screws that can be adjusted in or out to
align where the ice wheel axle goes through the
sensor board and the ice chute.
ROCKING CHUTE ICE DELIVERY SWITCH
ADJUSTMENT
To properly adjust the switch, first unplug the power
cord to the unit then remove the merchandiser. This
will give you access to the ice delivery switch located
on the left side of the rocking chute.
Begin by observing the chute by slowly pushing
against the rocking chute. When the ice delivery
switch clicks, measure the distance from the door
stops on the rocking chute bracket to the door. The
distance between the two must be no more than 1/4"
(0.64 cm), but no less than 1/16" (0.16 cm).
Door Stops
Door Lock
Door
Ice Delivery
Switch
STH14.book Page 122 Thursday, September 23, 2010 3:35 PM
Loading ...
Loading ...
Loading ...