Loading ...
Loading ...
Loading ...
Part Number STH14 9/10 61
4. On models without a top mounted ice machine,
remove the plastic lid from the top of the
dispenser.
5. Remove all ice from the dispenser.
6. Disconnect electrical power to the dispenser.
7. Remove agitator arm and paddlewheel pin.
Non-front Serviceable Motor
a. Rotate the agitator arm so the paddle wheel
pin handle is pointing up, toward the ceiling.
b. Prepare agitator pin for removal by removing
the stainless steel split ring.
c. Then remove the paddle wheel pin from the
hole in the agitator.
d. Push the agitator bar toward the back of the
unit until the agitator is free of the paddle
wheel hub.
Front Serviceable Motor
a. With agitator arm in any position remove
hitch clip pin from the mushroom bushing on
the rear of the ice bin.
b. Push the agitator bar toward the bushing to
remove it from the paddle wheel hub.
NOTE: If a top mount ice machine is installed, sliding
the ice machine to one side will make bin component
removal easier. If the ice machine is hard plumbed it
will need to be disconnected.
Non-front Serviceable
STH14.book Page 61 Thursday, September 23, 2010 3:35 PM
Loading ...
Loading ...
Loading ...