Loading ...
Loading ...
Loading ...
72 Part Number STH14 9/10
6. Mix a solution of mild detergent to clean the
Quickdraw components. Using the detergent
solution and a soft bristle brush or clean cloth,
clean the following components:
- Ice wheel
-Cup locator
- Quickdraw chamber
-Door
- Ice chute cover
7. Rinse all parts in clean running water.
8. Mix a sanitizing solution of 1/4 ounce (7.4 ml)
liquid, unscented bleach (5.25% CL NaO
concentration) for each gallon of water. The
mixture must provide 100 PPM available chlorine.
9. Using the sanitizing solution, a soft bristle brush,
or a clean cloth, sanitize the components listed in
Step 6. The ice chamber must be sanitized with a
soft bristle brush to adequately clean the metering
wheel slot and drainage area.
10. Reverse the procedure to reassemble the
Quickdraw mechanism.
NOTE: When inserting the pin through the ice wheel,
you will have to align the pin with the pattern of the
wheel hole.
STH14.book Page 72 Thursday, September 23, 2010 3:35 PM
Loading ...
Loading ...
Loading ...