Loading ...
Loading ...
Loading ...
Part Number STH14 9/10 77
REASSEMBLE THE ICE CRUSHER ASSEMBLY
1. Insert the hub/blade assembly into the ice crusher
housing. When inserting the hub/blade assembly
you must align the stationary blades with the
locating slots in the ice crusher housing.
2. When inserting the hub/blade assembly into the
ice crusher housing you must also make sure the
axle knob is in a vertical position. This will align
the rotating blades with the housing to ensure a
quick and easy installation.
3. Once all blades are in the crusher housing you
will need to align the crusher axle with the motor
shaft. You can do this by turning the axle knob
and pushing the blade assembly toward the motor
until the hub/blade assembly is flush with the end
of the crusher housing.
Hub/Blade
Assembly
Crusher Housing
Axle
Knob
Stationary Blades
Locking Tab
Crusher Housing
Hub/Blade
Assembly
STH14.book Page 77 Thursday, September 23, 2010 3:35 PM
Loading ...
Loading ...
Loading ...