Loading ...
Loading ...
Loading ...
150 Part Number STH14 9/10
Flav’R-Pic (FRP-250) Logic Matrix
System power on
(24V from transformer)
Energize
Touchpad (active)
Touchpad LEDs (sync w/other touchpad)
Program Mode?
Prog button
pressed > 3s?
LCD display
= 1
Brand or Flavor?
Carb/Non-carb Mode (Brand only)
Cont. LED - carbonated
Flash LED (0.5s on/off) - plain
Tap touchpad to switch
Dispense Time Mode (Flavor only)
Cont. LED - 1s dispense
Flash LED (0.5s on/off) - 1s dispense
Tap touchpad to switch
Prog button
pressed > 3s or
300s elapsed?
LCD Display
= 2
Brix Mode
Fixed 1.6s dispense
Brand = syrup and
Flavor=
F1 = C1, F2 = C2,
F3 = NC2
F5 = C4, F6 = C3,
F7 - NC3
Tap touchpad to activate
Prog button
pressed > 3s or
300s elapsed?
LCD Display
= 3
LED Sequence Mode
Touch brand button location shown below to change
1. LED flash outside to center (0.5s on/off) Default (S1 andS16)
2. LED flash center to outside (0.5s on/off) (S2 and S15)
3. LED flash all (0.5s on/off) (S3 and S14)
4. LED continuous (S4 and S13)
5. LED chaser left to right (S4 and S11)
6. LED chaser right to left (S6 and S12)
7. LED off all (S7 and S10)
Prog button
pressed > 3s or
300s elapsed?
LCD Display
= 0
Normal Dispense Mode
Brand - ON MODE - Water on then Syrup on 60 ms later.
OFF MODE - Syrup off then Water off 60 ms later.
Flavor shot - 1s or 2 s (release and press - no delay between dispenses)
n
n
y
n
y
n
y
Brand
Flavor
y
STH14.book Page 150 Thursday, September 23, 2010 3:35 PM
Loading ...
Loading ...
Loading ...