Loading ...
Loading ...
Loading ...
102 Part Number STH14 9/10
Flavor Shot Dispense Duration
1. Choose a control board. If programing flavor shots
for N2 (Nozzle 2) use the left control board, if
programming shots for N5 use the right control
board. Flavor shot dispense points are designated
by a blue nozzle.
2. Press the program button and hold for 3 seconds
or until the LED displays 1.
3. To set a 1 second shot for N2 (Nozzle 2) touch
one of the following touch pads; F1, F2, F3, or F4
until the LEDs around the touch pad are constant.
4. To set a 2 second shot for N2 (Nozzle 2) touch
one of the following touch pads; F1, F2, F3, or F4
until the LEDs around the touch pad are blinking.
- Constant LEDs = 1 second shot
- Blinking LEDs = 2 second shot
5. Follow the same instructions for N5 (Nozzle 5)
using the right control board and touch pads F5,
F6, F7, or F8.
6. When you are finished, press the program button
to go to a different mode or save your settings and
return the control board to the dispense mode by
pressing the program button and holding for 3
seconds or until the LED displays 0.
STH14.book Page 102 Thursday, September 23, 2010 3:35 PM
Loading ...
Loading ...
Loading ...