User's Guide - Page 373

For MFC-J1010DW. Also, The document are for others Brother models: MFC-J1012DW, MFC-J1170DW, MFCJ1010DW

Loading ...
Loading ...
Loading ...
Error Message Cause Action
See Related Information: Paper is
Jammed Inside and in the Front of the
Machine (Jam Inside/Front).
If you cannot print documents and
received faxes, transfer them to another
fax machine or to your computer before
disconnecting the machine so you will not
lose any important messages. Then,
disconnect the machine from the power
for several minutes and reconnect it.
See Related Information: Transfer Your
Faxes or Fax Journal Report.
Cannot Detect
You installed a new ink cartridge too
quickly and the machine did not detect it.
Take out the new ink cartridge and
reinstall it slowly and firmly until it locks
into place.
See Related Information: Replace the Ink
Cartridges.
An ink cartridge is not installed correctly.
A used ink cartridge was reinstalled. Remove the used ink cartridge and install
a new one.
If you are not using Genuine Brother ink,
the machine may not detect the ink
cartridge.
Use a new Genuine Brother Ink Cartridge.
If the error is not cleared, call Brother
Customer Service.
The ink cartridge must be replaced.
The new ink cartridge has an air bubble.
Replace the ink cartridge with a new
Genuine Brother Ink Cartridge.
Slowly turn the ink cartridge so that the
ink supply port is pointing downward, and
then reinstall the cartridge.
The wrong Brother model ink cartridge
was installed.
Check the model numbers of the ink
cartridges and install the correct ink
cartridges.
Cannot Detect Ink
If you are not using Genuine Brother ink,
the machine may not detect the ink
volume.
Use a new Genuine Brother Ink Cartridge.
If the error is not cleared, call Brother
Customer Service.
Cannot Scan XX
The machine has a mechanical problem. Disconnect the machine from the power
for several minutes, and then reconnect it.
If you cannot print documents and
received faxes, transfer them to another
fax machine or to your computer before
disconnecting the machine so you will not
lose any important messages. Then,
disconnect the machine from the power
for several minutes and reconnect it.
See Related Information: Transfer Your
Faxes or Fax Journal Report.
Comm. Error
Poor telephone line quality caused a
communication error.
Send the fax again or connect the
machine to another telephone line. If the
problem continues, call the telephone
company and ask them to check your
telephone line.
Connection Error
Other devices are trying to connect to the
Wi-Fi Direct network at the same time.
Make sure there are no other devices
trying to connect to the Wi-Fi Direct
network, and then try to configure the Wi-
Fi Direct settings again.
Connection Failed
The Brother machine and your mobile
device cannot communicate during the
Wi-Fi Direct network configuration.
Move the mobile device closer to your
Brother machine.
367
Loading ...
Loading ...
Loading ...