Loading ...
Loading ...
Loading ...
Set up Scan to Network Folder
The Scan to Folder feature allows you to scan a document directly to network folder. The printer must be
connected to a network, and the Scan to Folder feature must be set up by a network administrator before it can
be used.
●
Introduction
●
Before you begin
●
Method one: Use the Scan to Network Folder Wizard (Windows)
●
Method two: Set up the Scan to Network Folder feature via the HP Embedded Web Server
Introduction
There are two methods for conguring Scan to network folder, the Scan to Network Folder Wizard (Windows),
which is installed in the HP program group for the printer as part of the full software installation, and the
Network Folder Setup through the HP Embedded Web Server (EWS).
Before you begin
To set up the Scan to Folder feature, the network administrator needs access to the printer and information
about the network path and destination folder. The printer must have an active network connection to the same
network as the computer that will run the setup process.
Administrators need the following information before beginning the conguration process.
● Administrative access to the printer
● The network path of the destination folder (e.g., \\servername.us.companyname.net\scans)
NOTE: The network folder must be set up as a shared folder for the Scan to Network Folder feature to
work.
Method one: Use the Scan to Network Folder Wizard (Windows)
Use the Scan to Network Folder Wizard, available from the HP Printer Assistant application (Windows), to set up
the Scan to Network Folder feature.
Some operating systems do not support the Scan to Network Folder Wizard.
1. Open the HP Printer Assistant.
● Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.
● Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer
name.
ENWW Set up Scan to Network Folder 79
Loading ...
Loading ...
Loading ...