Loading ...
Loading ...
Loading ...
63
5.5.11 HTTP POST
Go to Config→Network →HTTP POST interface.
Check “Enable”, select protocol type and then set the server address (IP address/domain
name), server port and heartbeat interval.
Server address: the IP address/domain name of the third-party platform.
Server port: the server port of the third-party platform.
After the above parameters are set, click “Save” to save the settings. Then the device will
automatically connect the third-party platform. The online state can be viewed in the above
interface. After the device is successfully connected, it will send the alarm information
(HTTP format) to the third-party platform once the smart alarm is triggered. The alarm
information includes target tracing coordinates, target features, the captured original/target
image (like the captured face picture, motor vehicle picture) and so on.
5.5.12 HTTPS
HTTPs provides authentication of the web site and protects user privacy.
Go to Config →Network→HTTPS as shown below.
There is a certificate installed by default as shown above. Enable this function and save it.
Then the device can be accessed by entering https://IP: https port via the web browser (eg.
https://192.168.226.201:443).
Loading ...
Loading ...
Loading ...