Loading ...
Loading ...
Loading ...
2
⚠ Warning: Wear anti-static gloves or discharge static electricity before installing the
camera.
⚠ Caution: Do not provide two power supply sources at the same time for the device
unless otherwise specified; it may result in device damage!
Environment
Heavy stress, violent vibration or exposure to water is not allowed during
transportation, storage and installation.
Avoid aiming the camera directly towards extremely bright objects, such as, sun, as
this may damage the image sensor.
Keep away from heat sources such as radiators, heat registers, stove, etc.
Do not expose the product to the direct airflow from an air conditioner.
Do not place the device in a damp, dusty extremely hot or cold environment, or the
locations with strong electromagnetic radiation or unstable lighting.
Make sure that no reflective surface is too close to the camera lens. The IR light from
the camera may reflect back into the lens, resulting in image blur.
Operation and Daily Maintenance
There are no user-serviceable parts inside. Please contact the nearest service center
if the product does not work properly.
Please shut down the device and then unplug the power cable before you begin any
maintenance work.
⚠ Warning: All the examination and repair work should be done by qualified personnel.
Do not touch the CMOS sensor optic component. You can use a blower to clean the
dust on the lens surface.
Always use the dry soft cloth to clean the device. If there is too much dust, use a cloth
cleaning (such as using cloth) may result in poor IR functionality and/or IR reflection.
Dome cover is an optical device, please don't touch or wipe the cover surface directly
during installation and use. For dust, use oil-free soft brush or hair dryer to remove it
gently; for grease or finger print, use oil-free cotton cloth or paper soaked with
detergent to wipe from the lens center outward. Change the cloth and wipe several
times if it is not clean enough.
Privacy Protection
When installing cameras in public areas, a warning notice shall be given in a
reasonable and effective manner and clarify the monitoring range.
Loading ...
Loading ...
Loading ...